Usedboats.com

“SIMPLY IRRESISTABLE” is a big boat inside and out, excellent handling and a shapely profile. Only 296 hours on twin Mercruiser 8.1 SHO. Her mid cabin accommodations are impressive with staterooms fore and aft and a long salon with room for a crowd! This 41 pc is one of the cleanest low hour boats in Florida due to just being brought from Lake of the Ozarks!!! She has always been maintained, serviced and upgraded since her first day of service. The current owner has had a change of plans and is looking for offer's. “SIMPLY IRRESISTABLE”  is in custom built lift system and is ready to be shown. This one is a "9.9"!!!

 

 

BROKER REMARKS: “SIMPLY IRRESISTABLE”  is sure to make your weekends the best you've ever had. A private master stateroom, A Dinette/Settee for four and a mid-cabin stateroom makes it very easy to stay for an extended trip. Very nice galley, electronics, generator, Vaccuum head, windlass, T-8.2L MPI 400HP Mercruiser, Cabinets, lots of storage and class all around. Beautiful Express Formula with all the right options, 400 HP engine package makes her super fast and very economical, she will not last at this number, if your serious come see her and you will buy her, She has a upgraded late model Generator, Air Conditioning, Electronics, light wood Interior, Corian Counter Tops, all the bells and whistles, Aft cabin for guests, running her in 4 foot seas can only be described in one word, pleasant, she is an incredible sea boat as well as being super clean you will not be disappointed.

“ SIMPLY IRRESISTABLE”  is The largest Formula ever built. The 41 is a very large vessel both in and out, there are abundant appointments. Large salon area, lovely galley, two state rooms, centerline queen forward and a private thwart-ship queen aft. It also has a convertible dinette to make vessel able to sleep six when necessary. It has a very unique head with dual entry, large separate stall shower, Vacu Flush head. Very bright beige interior with rich  cabinetry, well ventilated and fully reverse cycle air-conditioned. Loads of storage for long cruises. This is a big boat inside and out. Gorgeous and well maintained.  Manifolds and riser’s replaced as well as full engine maintained this season!

 She is clean and dry stored on custom lift and has only been in Florida for one season. Owner wants her sold instead of shipping her back to the lake. Call anytime to see a perfect example of fresh water use and low hours.

 

 

Additional Specs, Equipment and Information:

 

Builder/Designer

Builder: Formula

 

Dimensions

LOA: 43 w/ SWMPLTFRM   Beam: 13'6      Displacement: 21000

Draft: 33'         Bridge Clearance: 11'10

 

Engines

Engine(s): MERCRUISER     Engine(s) HP: 400       Engine Model: 8.1 SHO

Hours: 296

 

Tankage

Fuel: 308         Water: 81        Holding: 30

 

SPECIFICATIONS

Centerline Length 41'0" 12.49 m

Length w/bow platform 43'0" 13.12 m

Maximum Beam 13'6" 4.11 m

Approx. Weight (gas/diesel) 18,520/21,015 lbs 8,401/9,532kg

Cabin Headroom 6'7" 2.01 m

Fuel Capacity (gas/diesel) 308/346 gal 1,166/1,310 L

Water Capacity 81 gal 307 L

Holding Tank Capacity 30 gal 113 L

Bridge Clearance (dry) 11'0" 3.35 m

Draft 33" .83 m

Deadrise 18° 18°

 

ACCOMADATION CONTENTS:

 

Staterooms

• Master Stateroom
• Television
• Air conditioning
• VCR
• Cedar lined lockers
• Carpeting
• Mirror

• Guest Stateroom
• Aft cabin conversion berth
• Air conditioning
• Locker
• Carpeting
• Mirror

 

 

 

Main Salon

• Ushaped couch
• Couch converts from dinette to berth
• Plastic carpet runners
• Light/dark ash wood
• Entertainment center
• Television

• Stereo system with AM/FM and CD
• VCR
• Carpeting
• Drapes
• Cabinet

 

 

Head

• Vacuflush
• Toilet
• Shower w/separate stall

• Mirror
• Vanity
• Cabinet

 

 

 

Main Salon

• Ushaped couch
• Couch converts from dinette to berth
• Plastic carpet runners
• Light/dark ash wood
• Entertainment center
• Television

• Stereo system with AM/FM and CD
• VCR
• Carpeting
• Drapes
• Cabinet

 

 

Head

• Vacuflush
• Toilet
• Shower w/separate stall

• Mirror
• Vanity
• Cabinet

 

 

 

 

 

41 PC CABIN EQUIPMENT

• Sliding/locking cabin door • UltraLeather HP™ headliner • Private forward stateroom

w/centerline bed, innerspring mattress & stowage below • Individual reading lights •

Cedar-lined hanging locker w/automatic light • Built-in WalVac® sweeper system •

Curved UltraLeather HP™ sofa seating w/dual-height dining table & filler cushion •

Cabinetry in maple or cherry finish • Two padded UltraLeather HP™ pedestal dining

stools • Decor pillows • Phone w/cord • 20" stereo TV/VCR in main salon w/dockside

access cord • Kenwood® remote control AM/FM auto-reverse cassette w/stealth

retraction faceplate, 10-disc CD player, cabin & dash-mounted remote controls & 800W

amplification • Two 150W 6" 3-way speakers & two 260W 6"x9" 3-way speakers •

UltraLeather HP™ aft cabin lounge/double berth w/filler cushion & privacy enclosure •

Cocktail table • Aft cabin hanging locker w/automatic light • In-floor storage

compartments • Complete entertainment galley w/storage, dovetailed maple drawers

& 120V/12V standup refrigerator/freezer w/panels and cabinet doors in maple or

cherry finish; full Corian® countertop; polished double-bowl stainless sink w/flush

Corian® covers; Gourmet Spray® faucet; 2-burner electric stove w/exhaust fan;

convection/microwave oven; coffee maker & concealed in-counter trash receptacle •

Demand water system • Water level gauge • 120V water heater w/heat exchanger •

Dual-entry molded fiberglass private head compartment w/molded fiberglass vanity,

Corian® counter, polished stainless sink, VacuFlush® unit w/holding tank & pumpout,

separate circular stall shower w/curved acrylic door & molded-in shelf & exhaust fan •

120V & 12V electrical panels • Fire extinguisher • Carbon monoxide fume detector •

In-floor cabin bilge pump.• 23,000 BTU reverse cycle air conditioner w/two-zone digital climate control •VacuFlush® unit w/Y-valve for macerator discharge or pump-out • Gray water holding system • 13" TV/VCR in master stateroom • Custom quilted bedspread & pillow shams • Bed linens & towels

 

 

ELECTRONICS:

 

RAYTHEON RC-520

RAYMARINE E-80

RAY215 DSC VHF

RITCHIE 4” COMPASS

RAYTHEON ST-60 SEPARATE DEPTH

KENWOOD STEREO PACKAGE WITH REMOTE @ HELM

 

 

 

DECK:

 

NMMA Yacht Certification • Foam-filled hull cavities • Imron® & cockpit accent striping • Chemically bonded & thru-bolted deck-to-hull joint • Heavy duty PVC gunwale w/stainless steel insert • Tinted, tempered curved glass windshield • Windshield wipers • Windshield center walk-thru • Stainless steel hardware & 316L stainless welded rails • 3 Bomar® cabin venting hatches w/screens • 6 port lights w/screens & draperies • Nonskid deck center walkway & walk-around • Integrated bow platform • Concealed anchor davit

w/fiberglass anchor locker • Two Dri-Fast® foam deck sunpads w/316L stainless rails

• Aluminum radar arch w/integrated flagstaff/mast light • Air horn • Integrated swim

platform • Concealed 316L stainless steel swim ladder • Outboard motor stowage &

fender access from swim platform • Concealed transom hookups for city water, cable TV

& telephone w/shorepower cord feed apertures.

 

COCKPIT • One-piece fiberglass deck & cockpit liner • Complete VDO® Vanguard™

backlit instrumentation/flush-mounted • Rudder indicator • Synchronizing tachometer •

Raytheon® RayData depth/speed/water temperature display • Ritchie® compass •

Teleflex® shift & throttle controls • Hydraulic steering w/tilt stainless steel wheel •

Protected chart storage, dash locker & drink holders • Auxiliary 12V outlet • Dashmounted stereo volume control • Two 200W 6"x9" 3-way speakers & two archmounted 100W 6 1⁄2" 2-way marine-grade speakers • Cellular phone hookup w/external antenna • Illuminated waterproof accessory rocker switches w/E-T-A® circuit breakers • Battery parallel switch • Cockpit courtesy lighting • Weather-resistant cockpit seating featuring Dri-Fast® foam & Kelron® synthetic marine panel construction • Triple

command seating w/dual-position helm seat & fiberglass-lined storage • Molded

fiberglass in-dash deck access steps • Port lounge w/pneumatic hatch lift & fiberglasslined storage • U-shaped lounge seating w/fold-away aft lounge & fiberglass-lined storage • Integral 316L stainless safety rails • Molded fiberglass wetbar w/Corian®

countertop, combination refrigerator/ice maker & 120V GFCI outlet • Fire extinguisher

• Disconnect switches for house & starting batteries • 120V shorepower w/galvanic

isolator and two 30-amp cords • Line locker • Concealed fender storage aft • Pneumaticassist transom door • Transom shower w/hot/cold controls

 

 

ENGINE ROOM • Twin engine installation • Motorized hatch lift • Integrated

quick access engine hatch • Courtesy lighting • Fume detector • Automatic fire

extinguisher • Thru-bolted engine mounts • Remote oil filters • Remote 12V oil change

system • Alternator noise filters • Engine raw water strainers/seacocks • AIRSEP®

intake filters (diesel only) • Side discharge muffler system • 3 deep-cycle batteries

w/battery retainers • 80-amp battery charger • Galvanic corrosion protection system •

Low-noise rotary bilge blowers • Automatic bilge pumps (2) • Bilge high water alarm •

Bennett® hydraulic trim tabs w/indicators • Bronze rudders & struts • 2" stainless steel

Aquamet 19 propeller shafts (1 3⁄4" gas only) • 4-blade nibral props

 

 

41 PC ADDITIONAL EQUIPMENT

• Electric windlass w/200' chain & Bruce® anchor • Remote control halogen

searchlight • Engine freshwater flush system • Berber cockpit carpet • Aft sun lounge package w/two dual-height cockpit tables & filler cushions • Front, side & extended aft

cockpit enclosure • Sunbrella® cockpit cover w/vinyl undercoating & SeaMark® waterrepellent finish • Sunbrella® storage cover •

 

 

2000 41 PC BROCHURE REMARKS:

Formula 2000 Performance Cruisers dominate as the most advanced luxury leaders on the water today. Elegant, flowing lines and quick, balanced performance evoke a deep sense of personal satisfaction, ensuring complete boating pleasure for you. Take command at the helm—it's the ultimate reward of Formula ownership. Responsive power, along with an exacting array of logically displayed gauges and electronics, provide the confident, informed control you want. During offshore adventures, the famous Formula deep-V cruising hull is reliably solid with expertly engineered internal reinforcement to ensure structural integrity throughout. Classic Imron® hull accents, in a choice of three different colors, underscore the distinctive design superiority of each Formula PC. An exclusive achievement in marine design, the Formula Cruiser cockpit features perfectly  proportioned, comfortable seating that is widely acclaimed for its faultless execution and detailing. A variety of entertaining and sunning arrangements are enjoyed by adding optional tables and filler cushions to the sociable U-shaped lounge. The fully integrated

wetbar is indispensable as a refreshment center and for easy cleanup afterward. All the cockpit storage you need for extended cruising is well provided for in a number of smoothly finished, easily accessed lockers and compartments. Equipment such as fenders, lines, shorepower cords and even the tables and filler cushions are easily secured in design dedicated storage areas. Formula cabin décor communicates self-assured sophistication to please your sense of harmonious styling. Color themes include rich emerald and Sapphire hues along with a luxurious Titanium palette that offers seemingly limitless opportunities to express your personal preference in color accents. Solid corian® countertops are complemented by gleaming, wood grain cabinetry in your choice of light, high-gloss maple or a handsome, traditional cherry finish. Elegantly textured, coordinating fabrics establish the unmistakable flair of designer expertise. A full complement of upscale amenities guarantees that your accustomed lifestyle is catered to in every detail throughout each new adventure aboard. All Formulas are constructed with a superior level of blue-water engineering, allowing your initial pleasure of ownership to remain strong year after year. Experience the gratification of Formula boating as you enjoy life to the fullest aboard your Formula Performance Cruiser – a boating investment that continues to retain its high value far into the future.

 

Formula Performance Cruisers—the key word is performance. Formula Cruising is fast, smooth and dry. With its reputation for performance, Formula wouldn’t build a Cruiser that wasn’t a pleasure to command. As you pick up the pace, your Formula PC responds with ease. Options of MerCruiser®, Volvo® or Cummins® engines provide just the right amount of horsepower to satisfy your need to move out. Formula Cruisers get you where

you want to go at an invigorating pace. Deep-V Hull design—responsive maneuverability. Formula’s deep-V hull is designed to give each model the excellent handling characteristics you expect of a Formula Cruiser. Whether smartly executing turns, briskly slicing through the waves or leisurely cruising to your destination, the hull ensures a supremely comfortable, solid ride for driver and passengers. Formula Cruiser Stability—the ride you enjoy. Count on smiles all around each time you head out in

your Formula Cruiser. The well-balanced running attitude and clear visibility plus a consistently stable ride put everyone at ease. Sunning or enjoying refreshments underway is next to impossible in some cruisers, but a Formula is built for comfort and smoothes the way for complete relaxation.

 

Formula Cabins—superior amenities. Formula cabins provide complete amenities for every cruising need. The galley, sleeping arrangements, head compartment facilities, lounges and entertainment features are superior in every way. Decor is beautifully coordinated in rich hues of sapphire blue or emerald green. Or, choose the sophisticated neutral titanium palette and accent with your favorite colors to express your very personal sense of style. Formula Cruiser Structure—offshore integrity. Formula Cruisers are designed for challenging offshore conditions. Expertly engineered to maintain absolute integrity, a Formula has solidity that breathes confidence into every cruising adventure you plan. Family and friends eagerly anticipate the excitement of new horizons and interesting ports. R&D—brings Adams’ designs to life. Formula’s focus on excellence begins in a model’s earliest stages of development. First, the deck and hull designs of each new boat are painstakingly replicated by our engineers in an advanced computer-aided design system. Using state-of the-art software to create a three-dimensional boat

on-screen, complex systems and components are properly positioned. Instantly available for reference, the exact dimensions and location of every part is stored to relay to the computer controlled routers. During production of cabinets, storage areas and structural components, this consistent accuracy ensures that your Formula Cruiser is not only the best in design, but it is also executed precisely. Meanwhile, a full-scale model or “plug” is built by hand, requiring months of exacting work. Using this symmetrical master, production molds are formed. Full-scale cabin and cockpit mock-ups are created to

fine-tune ergonomics and space utilization. Formula’s Research and Development Department fabricates each perfect mold used in production. CAD/CAM Technology—consistent accuracy. While many time-honored techniques are employed in developing a new Formula, the key to the final perfection of each part is the $250,000 state-of-the-art

CAD/CAM system. Stringers, plexiglass doors, mirrored panels, countertops and many other components are cut to exact specifications filed in the CAD/CAM computers. The Computer Numerically Controlled (C-N-C) routers maintain accuracy to within thousandths of an inch for a consistently precise fit. Look for this fit and finish  everywhere in a Formula. Sidewalls and headliners meet exactly—no bead welt is

necessary to hide faulty design or execution. Cabinets are contoured to conform to walls. In the cockpit, coaming panels fit snugly, with no need to fill gaps. Suspended Stringer System—essential integrity. Each Formula hull is reinforced with a custom-engineered matrix that is much stronger than the usual stringer system. This framework, cut by Formula’s C-N-C routers, is entirely encapsulated in resin and then laminated to the hull

while suspended on jigs fixed to the mold. Using biaxial fiberglass as a bridge, this unique suspension method eliminates contact distortion in the hull and creates a sturdy, level base so cabinets, seats and storage compartments fit perfectly every time.  I Incorporating this grid structure means your Formula not only looks great, but is built strong enough to hold its own offshore. Hand-Laid Lamination—it all starts here.

The gleaming exterior of a Formula, gelcoat, is first sprayed evenly into a carefully maintained mold. Then, precut shapes of fiberglass are layered with resin. Hightech

equipment ensures the exact ratio of catalyst to resin. Each layer of glass is hand-rolled and squeegeed for uniformity and to eliminate air pockets. Divinycell® coring and Coremat® are also utilized in designated areas for added lightweight strength and the prevention of laminate weave print-thru. Formula’s lamination schedule requires several days of cure time in the mold. Volume-driven manufacturers rush the process and release a molded part after only a day, which often leads to a foggy finish and surface distortion. Thunderbird’s exacting lamination schedule ensures your Formula’s smooth, flawless finish and its reliable offshore integrity. Pultrusion Reinforcement— more strength in critical areas. Specially shaped fiberglass supports, or pultrusions, are fixed in the hull where added torsional strength is needed, such as under fuel tanks and engines. These

pultrusions, custom-fabricated to Formula’s specifications, are bonded to the hull using Plexus® adhesive to ensure structural integrity with no hull distortion. Foam Injection—a solid, quiet ride. Filling hull cavities with rigid polyurethane structural foam adds further integral strength and flotation to all Formulas. You’ll appreciate another benefit of foam

construction—while boats without foam have a hollow, drumming sound going over the waves, the Formula Cruiser ride is exceptionally solid and quiet. AME® 5000 Resin—lasting flawless finish. Although AME® 5000 costs twice as much as general purpose resins, Formula specifies its use because it is the best resin available. This modified

epoxy, low-VOC marine resin produced by Ashland Chemical is applied with the first two layers of fiberglass in every Formula Cruiser hull. AME® 5000 protects and preserves the surface gelcoat with its exceptional strength and resiliency while providing

more flexibility and greater resistance to crazing, distortion and osmotic blistering. AME® 5000 is your assurance of a long-term, top-quality exterior finish.

 

Perma Panel® Matrix—guaranteed longevity. Along with the critical importance of the design and construction of each boat’s reinforcement matrix, materials used must be reliable to ensure structural longevity. The stringer system of each Formula PC is built with Perma Panel®. This specialty marine plywood is guaranteed never to succumb to fungal decay under normal marine conditions because it is pressure-treated with Osmose® CCA. The fungi that cause many boats’ premature stringer failure are prevented by utilizing Perma Panel®. Component Superiority— only the best. At Thunderbird, component reliability is paramount. Only the best products with the best service support are considered. When evaluating new components, trained technicians in

Formula’s Research and Development Department first determine the quality and endurance of each item. According to the results, a detailed recommendation or rejection

follows. If the item fails to meet our tough standards, you won’t find it in a Formula.

Formula Lab Testing—nothing is left to chance. At Thunderbird, thorough testing

ensures a superior finished product, so you spend a lot more time boating and a lot less down time for repairs. Every Formula component, system and construction material is subjected to prolonged testing under conditions far more severe than normal use.

Only the most reliable, most durable items are selected for a Formula. To ensure the continuing beauty of a mirror-like finish, each arriving shipment of resin is analyzed inThunderbird’s chemical lab before it is approved for use in your Formula. Thunderbird also carefully controls the temperature of the resin throughout storage and application, a

vital step to ensure consistent results.

 

Molded Cockpit—one continuous piece. Every Formula is designed with a continuous,  onepiece foredeck and full cockpit. Molded entirely in fiberglass, this design principle greatly increases integral strength. Sleek, unbroken lines with years of lasting beauty and easy, seamless maintenance make this a feature to insist on. Bonded Deck and Hull  Joint—unitized structure. To join the deck and hull, Formula uses a remarkably tenacious bonding agent, Plexus®. The resulting chemical meld is inseparable, far stronger than  any laminated joint. This rugged durability is extremely important offshore where wave action takes its toll on all but the strongest construction.

 

Bolted Deck and Hull Joint—fail-safe protection. After bonding the deck and hull with Plexus®, 1⁄4" stainless steel truss-head thru-bolts and stainless steel load-distributing backing plates are placed along the joint at 18-inch intervals. This fail-safe procedure means you can be certain that this joint is never going to leak or break apart. Stainless Bolts & Backing Plates— rugged reinforcement. When cleats and other hardware are installed, stainless steel backing plates and stainless steel bolts with nylock nuts are used for reinforcement. We also align all the head slots as a finishing touch! Our hardware isn’t just “lagged in,” like some, but is attached in the most rugged way for integrity you can count on. Flexible O-Rings—seal up tight. Formula places a flexible O-ring under the head of each bolt to effect an invisible, watertight seal. Unlike silicone applications, bolts can be adjusted if necessary and the O-ring continues to prevent leaks when reseated.

 

Curved Glass Windshield—clearly the best. Formula’s curved, tinted, tempered windshield is perfectly angled to deflect the rush of air from your eyes. Plus, it provides excellent visibility with no distortion. The Formula 41 PC and 27 PC provide convenient foredeck access through a hinged central panel. 316L Stainless Steel Rails—top-grade finish. All Formula safety rails are welded 316L stainless steel, the highest marine-grade stainless available. Check out the stainless rails on other boats. If it isn’t 316L, it isn’t good enough. Engine  mounts—maximum security. While lag-bolting engines into place is common, Formula thru-bolts all engine mounts using heavy, angled 1⁄2" aluminum plates.

 

So, your Cruiser is properly assembled to withstand the tremendous torque created by the engine at full throttle. “Open Trap” Battery Box. Formula uses a corrosion-resistant, non-conductive marine battery box. The “open trap” design ensures that battery gases cannot build up, and it also prevents accumulation of acid fumes and excess humidity. In addition, Formula uses deep-cycle batteries as standard in all Formula Cruisers. Deep-cycle  batteries can be recharged repeatedly without losing strength. This is another way we build in reliability to keep you on the water.

 

The Engine Room—safety first. Formula earns high marks for large, clean, well organized cruiser engine rooms. The oversized engine hatch raises at the touch of a switch for easy access. Non-slip flooring is installed where you need it most. Convenience is a key consideration, so oil filters are easily reached for a quick change. You’ll also appreciate safety features like the automatic bilge pump, bilge high water alarm, engine room fume detector and the automatic fire extinguishing system.

 

Electrical Service—depend on it. Formula is famous for its  meticulous electrical circuitry. Instead of pre-insulated connectors common in the industry, each Formula connection is individually secured with a visible crimp. The resulting fail-safe connection is then insulated with double-walled shrinktubing—the inner wall of hot-melt adhesive forms an impenetrable barrier against water and  corrosion, and the outer wall insulates the connector to prevent shorts. Formula wiring harnesses consist of color-coded wires for easy identification which are then routed through flexible conduit for protection and security. If service is necessary, panels can be easily removed and plenty of harness slack is provided to work with. You can depend on  Formula electrical systems to be up and running for all your good times on the water. Heavier Gauge Wire—bigger is better. In many places, Formula uses heavier wire than the industry norm for maximum reliability, extended life for motorized componentry and less maintenance overall. To further ensure trouble-free service, all major harness runs are integrated with transparent, multiple pin quick disconnects that are tiewrapped together and taped at each junction. These extra measures create a secured, weatherproof connection that is far superior to other methods commonly employed. Electronics—room to expand. When you add a GPS or VHF radio to your helm station, Formula installs the latest in quality electronics. The dash panel of your Cruiser is designed to accommodate other accessories that you select such as autopilot, fish finder, chart plotter or radar (on the 41 PC). Formula attaches the instrument panel with recessed nutserts to allow for  easy accessory installation, and also to facilitate inspection or service.

 

Noise Suppression System— all the music, none of the static. Thunderbird installs a custom-designed noise suppression system that effectively eliminates the alternator’s interference in stereo  performance. Whether you like to listen to classical, jazz, country or rock, you enjoy every last note without static, even with the engines running. This important detail increases Formula boating pleasure for you.

 

42 Formula’s Cruiser Helm—ergonomic perfection. Formula designs the entire Performance Cruiser helm to ergonomic perfection. The proximity of the driver’s seat and the shifters, throttles, gauges and accessory switches is carefully considered in each new model. Everything is easily seen and reached, giving you the utmost in informed control at the helm. Rocker Control Switches— reliable and waterproof. Formula’s accessory rocker switches are backlit for easy function identification and ready access. They keep you in touch with all systems. Plus, specialized design prevents water from seeping under and causing a malfunction. E-T-A® Circuit Breakers—hassle-free protection. Formula protects your boat’s electrical  system with circuit breakers from E-T-A®, long recognized as a leader in overcurrent protection. E-T-A® circuit breakers are used in high-end marine, aircraft, military and automotive industries. These breakers give you the assurance of electrical circuit security with the convenience of a simple “push-push” design. Push to reset or to manually  disconnect the circuit—no more fumbling for proper-amperage fuses! Go offshore with the confidence that your Formula and all aboard are safeguarded by quality electrical components. Formula Dual-Position Helm Seat— comfort all the way.

 

Formula engineers know how important comfortable command is, whether you’re just going for the day or a longer cruise. A specially designed helm seat on all Performance Cruisers gives you the option of sitting, standing or leaning back against the well padded, hinge-up bottom section. This feature reduces fatigue by allowing you to vary your driving position. Formulas are designed for people who boat a lot, so you will appreciate this benefit often.

 

Wood-Free Cockpits—Yes! You want a cockpit that will hold up in the great outdoors, so Formula uses Kelron® marine panel, a polyurethane sheet material, as an alternative to

wood in coaming panels, internal seat structure and reinforcing panels. We also use  rotocast and fiberglass shapes as the core for sturdy, virtually indestructible seats that can take it year after year. Removing wood from the cockpit not only extends the serviceability of your Formula but also increases your pleasure in its continued good looks.

 

Formula Cabinets—precision artistry. Formula cabinetry is expertly designed and skillfully tooled. The clean presentation and precise fit are the result of our exacting assembly methods and top-quality materials. Using the CAD/CAM system, programmed routers cut, drill and groove cell-cast plexiglass, laminates, reflective acrylics and wood precisely to specifications for a perfect fit every time. Using plexiglass for doors in the 27 PC eliminates warping and creates a sleek, polished look. The choice of deep maple or  cherry wood grain finish used in the 31 PC, 34 PC and 41 PC cabins gives your Formula an aura of classic luxury. Woodwork details such as dovetail joints in 41 PC galley  drawers reflect the meticulous fit and finish that is the Formula standard. Galley countertops and fiddle accents are crafted of seamless Corian®, a prestigious  complement to the polished stainless steel sink. Formula reinforces cabinet installation with heavyduty stainless steel L-brackets and installs protective plastic grommets for electrical wiring runs. Positive locking latches keep doors securely closed while  underway.

 

Cockpit Storage—places for everything. Convenient, neatly finished storage areas abound in all Formula Cruisers. Smooth, molded fiberglass compartments provide room for all your gear, whatever the length of your cruise. Formula engineers designated special storage for lines, fenders and PFDs in every model. In the 31 and 41 PC, large storage areas are found under the port seats, which lift pneumatically for easy access. There is an ample storage area under the double helm seat in the 27 PC, and more under the aft seats. The 34 PC has storage behind the aft seats and under the double port seat. The 41 features dedicated outboard motor storage for your dinghy in the transom   compartment. Bring on all the items you like to have aboard— there’s a place for everything in a Formula Performance Cruiser.

 

Formula Seating—best in the business. Formula excels in carefully designed, comfortable seating. Human dimension criteria is utilized to achieve correct contouring. Separate, preshaped foam components are arranged in each seat to provide optimal  lumbar and leg support. Every Formula seat is “the best in the house.”

 

Transportation Grade Vinyls— long-term satisfaction. Formula’s durable cockpit upholstery is transportation grade, so it takes lots of outdoor wear and  still looks great. This top quality vinyl is color-permeated to match Formula Imron® colors. Specially treated to resist staining, Formula’s custom white vinyl remains comfortably cool to the touch even in direct sunlight. With an expanded knit back, Formula vinyl holds its shape much better than ordinary vinyls. You’ll appreciate the like-new appearance for years to come.

 

 

GERBERcutter®—computer accuracy for fabrics. Formula’s computer-based cutting system, the GERBERcutter®, is a CAD/CAM system for upholstery fabrics. Parts are cut rapidly and with unvarying consistency. The GERBERcutter® allows for more complex patterning and contouring which greatly enhances the appearance and overall finish of Formula upholstery.

 

UltraLeather HP™ Lounge Seating— practical luxury. As you relax in the cabin,  

UltraLeather HP™ upholstered lounge seating creates a pleasurable retreat. UltraLeather HP™ has the rich feel of the most supple leather, but is surprisingly tough and durable. It is also  practical—spills wipe up easily. Comfort, beauty and function combine naturally in a Formula Cruiser cabin appointed with elegant UltraLeather HP™ materials.

 

Dri-Fast® Foam—water runs right through! Formula utilizes special polyurethane Dri-Fast® foam in cockpit seating. Its construction allows water to pass through at once, so you avoid the discomfort of soggy, wet seats and the musty odors generated by saturated cushions. This Formula feature is sure to please everyone.

 

In-Water Testing—for every Formula. Slide behind the wheel of your new Cruiser— Formula in-water testing means it is turn-key ready for you. Every Formula is individually tested in one of four test tanks. The extensive checklist program ensures that engines are operating at peak efficiency, and that all  instruments, systems and accessories are in perfect working order. In other untested boats, system failures are discovered by the owner. Not so in your Formula. It has been thoroughly checked out and it is ready to perform.

 

 

Watertight Seal—no surprises. During the test tank procedure, every Formula is subjected to a continuous spray of water on the deck to confirm a watertight seal. Technicians inspect the seal around deck hatches and around hardware and fixtures.  Windshield-to-deck surfaces are sprayed from the cockpit and all cockpit drains have  gallons of water run through to check for positive discharge flow. Hose off your deck with complete confidence. You won’t be surprised by a leak in your new Formula!

 

 

Imron® Colors—tasteful Cruiser graphics.The exterior of your boat expresses your own unique taste and sense of style. Formula’s use of Imron®, a DuPont polyurethane enamel, will keep your graphic selection beautiful year after year. Imron® never “chalks” or fades as ordinary gelcoat graphics do, so it is easily repaired if damaged. Formula technicians carefully hand mark and mask each color area of your design, then apply the colors one at a time in a dust-free spray booth. Extra care is taken to prepare the area for the paint. The  and result is an elegant graphic that retains its original beauty with minimal care.

 

 

Bomar® CRX Hatches— Secure ventilation and lighting. As cabin ventilation and  ambient light are important to the cruising lifestyle, Formula installs only Bomar® CRX model hatches. Constructed of Lexan, which has the strength of more than five inches of acrylic, and powder-coated Almag-35 cast aluminum alloy frames, these low-profile hatches are designed for strength and pitting resistance as well as good looks. CRX  model hatches are “clamped” to the deck from inside the boat—there are no screw heads on the outside of the hatch to trap dirt, corrode or leak, or to detract from the sleek lines of the hatch. Functional and beautiful, these hatches will add to the pleasure of owning your Formula for years to come.

 

 

Formula Quality Assurance Program— our seal of excellence. Formula owners enjoy  many more hours of carefree boating because of Thunderbird’s Quality Assurance Program. The QAP inspection involves both corporate and production employees who go  over the finished product as if they were prospective owners. Every detail is examined from the consumer’s critical viewpoint. This final inspection not only helps deliver a perfect Formula to you, but it also reinforces each employee’s personal commitment to  top quality. Once approved, the Formula has finally earned its marque of true  excellence—the gleaming Formula name and prestigious Thunderbird emblem. In the elite domain of luxury cruising, Formula is Number One!

 

 

 

 SHAPE  * MERGEFORMAT